Job overview
A Mechanical Design Engineer High Voltage opening is now listed by Hitachi Energy for Chennai, Tamil Nadu. The role leads mechanical design, simulation and new product development for power electronics.
Chennai has a deep pool of automotive, energy and technology companies, so experience gained here is easy to carry to your next role. The listing marks this opening as on-site, so you should be ready to work from the location every working day.
What the Mechanical Design Engineer High Voltage will do
Here are the core responsibilities taken from the company’s own posting, written in plain words:
- Lead mechanical design for power electronics products.
- Run structural simulation with Abaqus FEA or Ansys Workbench.
- Run CFD studies with Fluent where needed.
- Use MATLAB for analysis.
- Support new product development with deep material science knowledge.
Duties can shift with project needs, so treat this list as a guide and read the full description on the employer’s portal before you apply.
Eligibility and experience
Hitachi Energy asks for a Bachelor’s or Master’s in Mechanical Engineering and ten or more years of experience. Experience of 10+ years is expected, which places this opening at a mid or senior level.
Skills that will help you
These skills appear most useful for this opening:
- Mechanical design depth.
- Simulation tools.
- NPD experience.
- Material science.
Whenever you list a skill on your CV, be ready to explain a real situation in which you used it.
Three themes run through the listing: Abaqus and Ansys, Fluent CFD and new product development. If your profile touches at least two of them, say so in the first lines of your CV.
Who should apply
It suits senior design engineers with ten or more years in power electronics. It may not suit anyone who cannot commute to or relocate near Chennai.
A typical working day
Your day will mix several tasks. You are likely to run structural simulation with Abaqus FEA or Ansys Workbench, then use MATLAB for analysis, and at other times lead mechanical design for power electronics products. Your exact routine will depend on the team, the project phase and your manager’s priorities.
How to prepare for the interview
Interviewers for engineering roles like to test fundamentals before tools. Revise the theory behind your main subject, then be ready to show how you applied it in a college project, internship or job.
Many panels ask why you want to join this particular company. Read the careers page and recent company news so your answer sounds informed. One likely question is how you would run structural simulation with Abaqus FEA or Ansys Workbench. Another may ask how you would use MATLAB for analysis. Spend extra time on Abaqus and Ansys, Fluent CFD and new product development, because the listing points to them.
Resume tips for a Mechanical Design Engineer High Voltage application
Keep the CV to two pages and give each project one line on scope and one line on result. Leave out photographs, long objectives and unrelated certificates.
Use one clean font, clear headings and plain bullet points so that screening software and people can both read your CV.
Borrow the employer’s own terms for tools and duties, but only where they match what you have done. If the employer writes Abaqus and Ansys or Fluent CFD, make sure those exact words appear in your CV. Give proof for mechanical design depth, and for simulation tools, with a project, a figure or a result next to each.
Career growth after this role
With steady experience, many engineers shift towards architecture, customer-facing technical roles or programme management. Skills built in this job travel well, so the experience stays useful even if you later move to another employer.
How fast you move up depends on Hitachi Energy and on your results, so ask what the typical path looks like. Asking about onboarding and training shows genuine interest.
Questions to ask the recruiter
Good questions show that you read the listing with care. Consider these for the Hitachi Energy opening:
- How are new joiners trained during the first few months?
- Is there any travel or site work in this position?
- How is technical work reviewed and approved in this team?
- How does the team share knowledge and handle handovers?
Note each reply after the call so you can weigh this job against any other offer you receive.
Common mistakes to avoid
Avoid speaking badly about a former employer. Keep your answers calm and focused on what you want to learn next.
One more point: apply once, keep the same CV on record, and answer recruiter calls promptly. Mixed-up profiles at Hitachi Energy slow the screening down.
How to apply for the Mechanical Design Engineer High Voltage job
Apply through the Hitachi Energy careers site by using the button on this page. The link takes you straight to the company’s own posting. Prepare an updated CV and a short profile summary before you open the portal, because some systems time out during long forms.
Watch your inbox for a few weeks, as larger companies often take time to shortlist.
Frequently asked questions
Can a fresher apply for this Mechanical Design Engineer High Voltage job?
Freshers are unlikely to be shortlisted, because the employer expects 10+ years of relevant experience. Build experience first and apply for this kind of role later.
Which tools are required?
The listing asks for any of MATLAB, Abaqus FEA or Ansys Workbench, plus Fluent for CFD.
Which strengths matter most to the employer?
Three points matter most here: simulation tools; mechanical design depth; and material science. Show each with a project, a figure or a short story from your work.
Where is this job located?
The employer lists Chennai, Tamil Nadu as the work location. Check the final site address with the recruiter, especially if the company has several offices nearby.
Quick facts
- Company: Hitachi Energy.
- Location: Chennai, Tamil Nadu.
- Experience: 10+ years.
- Job type: Full-time.
- Education: Bachelor’s or Master’s degree in Mechanical Engineering.
- Work mode: on-site.
- Application route: Official company career portal.
Stay safe while applying
Never pay for a test, a kit or a training seat to get a job. Real employers do not ask for it.